Cart
DC Power Components
DC Combiner Boxes

DC Combiner Boxes

CDMNPV3

CDMNPV3

Gray aluminum type 3R rainproof enclosure with deadfront, will accept three 150VDC (CDMNEPV) breakers or four 600 VDC fuse holders. With modifications to the deadfront three dinrail fuse holders can be used. Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar.
Breakers/fuse holders sold separately.
CDMNPV6

CDMNPV6

CDMNPV6
Click to enlarge image(s)
(For 150 VDC charge controllers and 600 VDC gridtie inverters) (The most popular PV combiner in North America.) Gray aluminum type 3R rainproof enclosure with insulating dead front, will accept six 150VDC breakers or 4 600VDC fuse holders. Includes 15 position PV negative bus bar, 14 position ground bus bar, 120 amp Plus bus bar for breakers and 80 amp bus bar for fuses.
Breakers/fuse holders sold separately.
Shipping: 9 x 14 x 4 - 4 Lbs.
CDMNPV12

CDMNPV12

(For 150 VDC charge controllers and 600 VDC gridtie inverters) Gray aluminum type 3R rainproof enclosure with insulating dead front, will accept 12 150VDC breakers or 10 600VDC fuse holders. Includes 15 position PV negative bus bar, 15 position ground bus bar, and 200 amp Plus bus bar for breakers and fuses. Plus busbars can be combined or separated to support 2 inverters or charge controllers. Gridtie inverters typically can have PV minuses common. Most charge controllers can have PV minuses common (Exception XW and BlueSky).
Breakers/fuse holders sold separately.
Shipping: 16 x 14 x 5 - 8 Lbs.
Mini-DC Disconnect

Mini-DC Disconnect

Mini-DC Disconnect Power Center with inverter breaker and din rail

Mini-DC Disconnect Power Center with inverter breaker and din rail

Mini-DC Disconnect Power Center with inverter breaker and din rail
Click to enlarge image(s)
The CDMNDC comes with a din rail for 5 additional DC breakers for DC loads, charge controller disconnect, battery status monitor feed, etc. A ground bus (5/16” bonding battery minus stud) is included. Mounting holes for a 500 amp shunt are built in.
White alum with 125a/125VDC breaker
Shipping: 10 X 5 X 18” - 7 Lb.
Mini-DC Disconnect Power Center with inverter breaker and din rail

Mini-DC Disconnect Power Center with inverter breaker and din rail

Mini-DC Disconnect Power Center with inverter breaker and din rail
Click to enlarge image(s)
The CDMNDC comes with a din rail for 5 additional DC breakers for DC loads, charge controller disconnect, battery status monitor feed, etc. A ground bus (5/16” bonding battery minus stud) is included. Mounting holes for a 500 amp shunt are built in.
White alum chassis with 250a/125VDC breaker
Shipping: 10 X 5 X 18” - 7 Lb.
Breakers

Breakers

CDMNEPV

CDMNEPV

CDMNEPV
Click to enlarge image(s)
150VDC din rail mount breaker (13mm wide)
1,2,3,4,5,6,7,8,9,10,12,15,20,30,40,50,63 amps available
CDMNEPV breakers are the same as CBI QY breakers available
Elsewhere, except ours are 150VDC!

Shipping: 13mm wide - 1 lb
DC Ground Fault Protector - 63 amp

DC Ground Fault Protector - 63 amp

DC Ground Fault Protector - 63 amp
Click to enlarge image(s)
63 amp 150VDC DC ground fault protector (UL listed breaker assy).
NEC2008 requires DC-GFP’s in ALL solar installations
Shipping: 2 lb.
DC Ground Fault Protector - 80 amp

DC Ground Fault Protector - 80 amp

DC Ground Fault Protector - 80 amp
Click to enlarge image(s)
80 amp 125VDC DC ground fault protector (UL listed breaker assy) ½ amp trip mechanism connects between battery negative and earth ground NEC2008 requires DC-GFP’s in ALL solar installations
Shipping: 2 lb.
CDMNEAC – 10, -15, -20

CDMNEAC – 10, -15, -20

CDMNEAC – 10, -15, -20
Click to enlarge image(s)
10, 15 or 20 amp 120VAC UL489A din rail mount.

Shipping: 13mm wide - 1 lb
Shunt

Shunt

CDSHUNT

CDSHUNT

CDSHUNT
Click to enlarge image(s)
500amp/50mV includes taptite mounting screws. Has two 8-32 tapped holes on one end to attach a bus bar. This is the industry standard shunt.
Shipping: 2 Lbs
CDSHUNT WIRE

CDSHUNT WIRE

CDSHUNT WIRE
Click to enlarge image(s)
Shunt wire 36” long. Two twisted pair, one red & black, one blue & white Includes two ring terminals. Bogart Engineering recommends twisted wire.
Shipping: 1 Lb.
Battery Monitors

Battery Monitors

CDTM2020

CDTM2020

CDTM2020
Click to enlarge image(s)
Tri-Metric 2020 Meter – monitor volts, amps and amp-hours at a glance, useful in trouble shooting renewable energy system problems, analyzing system performance, monitoring battery capacity, resistance and efficiency, check charge controllers and monitor battery charging.
Shipping: 3 x 4 x 6 – 2 lb.
406-781-3235
Business Hours: 9am - 6pm Mon. thru Fri. MST
Copyright © Chinook Distributing, LLC Cascade, MT
sales@chinookdistributing.com
www.chinookdistributing.com

Credit Card Processing