Cart
Charge Controllers

 

 

          DL 300 Dump Load Controller –

          Integrated solution designed to
          prevent 12 or 24 volt batteries from
          over-charging. It is designed to be
          used with small wind systems.


DL300 Specifications - 300 watt model

DL300 Specifications - 300 watt model

Operation

  • PWM (Pulse Width Modulation) for highest charging performance without flicker
  • Selectable three stage charging or over voltage protection mode
  • Selectable for sealed or flooded batteries using jumper
  • Status and fault indicator LEDs

Power, 12 volt version, DL300-12

  • Operating voltage range: 7 to 32 volts DC
  • Recommend fuse or circuit breaker: 30 amps
  • Integrated load resistor: 0.75 ohm, 300 watt, wire wound
  • Quiescent current when not load dumping: 2.6mA @ 12 volts

Power, 24 volt version, DL300-24

  • Operating voltage range: 7 to 32 volts DC
  • Recommend fuse or circuit breaker: 15 amps
  • Integrated load resistor: 3 ohms, 300 watt, wire wound
  • Quiescent current when not load dumping: 3.0mA @ 24 volts

Connections

  • #10-32 brass screws for V+ and V-
  • Two 1/2" / 3/4" concentric NPT knockouts and two 1/2" NPT knockouts

Mounting

  • Mounts to vertical concrete, metal, drywall, or other non-flammable surface.
  • Uses four #10 screws
  • Body sits 19mm out from wall
  • NEMA 1 enclosure for indoor mounting

Weight and Dimensions

  • Dimensions: 88mm wide, 95mm tall, 470mm long (3.375 x 3.75 x 18.5 in)
  • Weight: 1.94 kg (4.28 pounds)
  • Shipping Dimensions: 102 mm wide, 108 mm tall, 508 mm long (4.0 x 4.25 x 20 in)
  • Shipping Weight: 2.15 kg (4.75 pounds)

Materials

  • Enclosure: 18 gauge mild steel, powder coated black
  • Circuit board: FR-4, 1.6mm (0.062 in), double sided, plated through holes, solder mask, silk screen, gold plating
  • Hardware: stainless steel, zinc plated steel, aluminum, and Nylon
  • Shipping carton: corrugated cardboard
Outback 80 amp/150 VDC MPPT  Solar Charge Controller

Outback 80 amp/150 VDC MPPT Solar Charge Controller

Outback 80 amp/150 VDC MPPT  Solar Charge Controller
Click to enlarge image(s)
More Info
Outback 60 amp/150 VDC MPPT Solar Charge Controller

Outback 60 amp/150 VDC MPPT Solar Charge Controller

Outback 60 amp/150 VDC MPPT Solar Charge Controller
Click to enlarge image(s)
More Info
HUB 4 Communications Manager

HUB 4 Communications Manager

HUB 4 Communications Manager
Click to enlarge image(s)

  The HUB system communications managers are the backbone of your networked OutBack power conversion system. The OutBack HUB communicates stacking, load share and power save off/on signals. Interconnection cabling is standard Ethernet CAT5 with RJ45 modular jacks. Through the use of a HUB, your system is completely coordinated and managed by the MATE


Link for the OutBack Hub : http://www.outbackpower.com/products/communications/hub

406-781-3235
Business Hours: 9am - 6pm Mon. thru Fri. MST
Copyright © Chinook Distributing, LLC Cascade, MT
sales@chinookdistributing.com
www.chinookdistributing.com

Credit Card Processing